SOA/RPC>> habitat>> 返回
项目作者： chef-cookbooks

项目描述 ：
Chef Cookbook for Habitat
高级语言： Ruby
项目地址: git://github.com/chef-cookbooks/habitat.git
创建时间： 2016-05-11T23:24:19Z
项目社区：https://github.com/chef-cookbooks/habitat
开源协议：Apache License 2.0
下载


Habitat Cookbook

Cookbook Version
CI State
License

Deprecation

Great news: The habitat resources from this cookbook are now included directly in Chef Infra Client 17.3 or later. Due to this we will no longer be making enhancements to this cookbook. If you have any feature requests or would like to open a PR with improvements please direct them to https://github.com/chef/chef

Description

This cookbook provides resources for working with Habitat. It is intended that these resources will be included in core Chef at some point in the future, so it is important to note:

  • APIs are subject to change
  • Habitat is a rapidly changing product, and this cookbook may change rapidly as well

License Note

Habitat requires acceptance of a license before any habitat commands can be run. To accept the Habitat license using this cookbook, the license parameter can be set to accept for either the hab_install or hab_sup resources as shown in the below examples:

  1. hab_install 'install habitat' do
  2.   license 'accept'
  3. end
  1. hab_sup 'default' do
  2.   license 'accept'
  3. end

PLEASE NOTE: Without performing one of the above license acceptance steps, all other resources in the habitat cookbook will fail with an error prompting that the license must be accepted.

Requirements

Platforms

  • RHEL 6+
  • Ubuntu 16.04+
  • Debian 9+
  • Windows 2016+

Habitat

  • Habitat version: 1.6.56+ You can also pin to older versions if desired

This cookbook used to base version number off of the latest stable Habitat release and install a specific version of Habitat based upon the cookbook version. Current behavior is now that the cookbook will install the latest stable release of Habitat on the source Habitat Builder which is contacted by default, but allows for explicit version pinning to be set via cookbook resources.

Chef

  • Chef 12.20.3+

Cookbooks

  • None

Resources

hab_install

Installs Habitat on the system using the install script.

Actions

  • install: Installs Habitat. Does nothing if the hab binary is found in the default location for the system (/bin/hab on Linux, /usr/local/bin/hab on macOS, C:/habitat/hab.exe on Windows)
  • upgrade: Installs the latest version of Habitat, does not check if the binary exists

Properties

  • install_url: URL to the install script, default is from the habitat repo
  • bldr_url: Optional URL to an alternate Builder (defaults to the public Builder)
  • create_user: Creates the hab system user (defaults to true)
  • tmp_dir: Sets TMPDIR environment variable for location to place temp files. (required if /tmp and /var/tmp are mounted noexec)
  • license: Specifies acceptance of habitat license when set to accept (defaults to empty string).
  • hab_version: Specify the version of Habitat you would like to install (defaults to latest)

Examples

  2. # Nameless Installation
  3. hab_install
  5. # Instalaltion specifying a bldr URL
  6. hab_install 'install habitat' do
  7.   bldr_url 'http://localhost'
  8. end
  10. # Installtation specifying version and bldr URL
  11. hab_install 'install habitat' do
  12.   bldr_url 'http://localhost'
  13.   hab_version '1.5.50'
  14. end

hab_package

Install the specified Habitat package from builder. Requires that Habitat is installed

actions

  • install: installs the specified package
  • upgrade: installs the specified package. If a newer version is available in the configured channel, upgrades to that version
  • remove: Will remove packages no longer wanted.

Properties

  • package_name: A Habitat package name, must include the origin and package name separated by /, for example, core/redis
  • version: A Habitat version which contains the version and optionally a release separated by /, for example, 3.2.3 or 3.2.3/20160920131015
  • bldr_url: The habitat builder url where packages will be downloaded from (defaults to public habitat builder)
  • channel: The release channel to install from (defaults to stable)
  • auth_token: Auth token for installing a package from a private organization on builder
  • binlink: If habitat should attempt to binlink the package. Acceptable values: true, false, :force. Will faill on binlinking if set to true and binary or binlink exists.
  • options: Pass any additional parameters to the habitat install command.
  • keep_latest: Ability to uninstall while retaining a specified version (Default is not set. This feature only works in Habitat 1.5.86+)
  • no_deps: Remove package but retain dependencies (Default is false)

While it is valid to pass the version and release with a Habitat package as a fully qualified package identifier when using the hab CLI, they must be specified using the version property when using this resource. See the examples below.

Examples

  1. hab_package 'core/redis'
  3. hab_package 'core/redis' do
  4.   version '3.2.3'
  5.   channel 'unstable'
  6. end
  8. hab_package 'core/redis' do
  9.   version '3.2.3/20160920131015'
  10. end
  12. hab_package 'core/nginx' do
  13.   binlink :force
  14. end
  16. hab_package 'core/nginx' do
  17.   options '--binlink'
  18. end
  20. # Remove all
  21. hab_package 'core/nginx'
  22.   action :remove
  23. end
  25. # Remove specified
  26. hab_package 'core/nginx/3.2.3'
  27.   action :remove
  28. end
  30. # Remove but retain some versions (only available as of Habitat 1.5.86)
  31. hab_package 'core/nginx'
  32.   keep_latest '2'
  33.   action :remove
  34. end
  36. # Renove but keep dependencies
  37. hab_package 'core/nginx'
  38.   no_deps false
  39.   action :remove
  40. end

hab_service

Manages a Habitat application service using hab sup/hab service. This requires that core/hab-sup be running as a service. See the hab_sup resource documentation below for more information about how to set that up with this cookbook.

Note: Applications may run as a specific user. Often with Habitat, the default is hab, or root. If the application requires another user, then it should be created with Chef’s user resource.

Actions

  • :load: (default action) runs hab service load to load and start the specified application service
  • :unload: runs hab service unload to unload and stop the specified application service
  • :reload: runs the :unload and then :load actions
  • :start: runs hab service start to start the specified application service
  • :stop: runs hab service stop to stop the specified application service
  • :restart: runs the :stop and then :start actions

Properties

The remote_sup property is valid for all actions.

  • remote_sup: Address to a remote Supervisor’s Control Gateway [default: 127.0.0.1:9632]
  • remote_sup_http: Address for remote supervisor http port. Used to pull existing configuration data. If this is invalid, config will be applied on every Chef run.
  • gateway_auth_token: Auth token for accessing the remote supervisor’s http port.

The follow properties are valid for the load action.

  • service_name: name property, the name of the service, must be in the form of origin/name
  • loaded: state property indicating whether the service is loaded in the supervisor
  • running: state property indicating whether the service is running in the supervisor
  • strategy: Passes --strategy with the specified update strategy to the hab command. Defaults to :none. Other options are :'at-once' and :rolling
  • update_condition: Passes --update-condition dictating when this service should updated. Defaults to latest. Options are latest or track-channel Note: This requires a minimum habitat version of 1.5.71
    • latest: Runs the latest package that can be found in the configured channel and local packages.
    • track-channel: Always run what is at the head of a given channel. This enables service rollback where demoting a package from a channel will cause the package to rollback to an older version of the package. A ramification of enabling this condition is packages newer than the package at the head of the channel will be automatically uninstalled during a service rollback.
  • topology: Passes --topology with the specified service topology to the hab command
  • bldr_url: Passes --url with the specified Builder URL to the hab command. Depending on the type of Builder you are connecting to, this URL will look different, here are the 3 current types:
    • Public Builder (default) - https://bldr.habitat.sh
    • On-Prem Builder installed using the Source Install Method - https://your.bldr.url
    • On-Prem Builder installed using the Automate Installer - https://your.bldr.url/bldr/v1
  • channel: Passes --channel with the specified channel to the hab command
  • bind: Passes --bind with the specified services to bind to the hab command. If an array of multiple service binds are specified then a --bind flag is added for each.
  • binding_mode: Passes --binding-mode with the specified binding mode. Defaults to :strict. Options are :strict or :relaxed
  • service_group: Passes --group with the specified service group to the hab command

Examples

  1. # install and load nginx
  2. hab_package 'core/nginx'
  3. hab_service 'core/nginx'
  5. hab_service 'core/nginx unload' do
  6.   service_name 'core/nginx'
  7.   action :unload
  8. end
  10. # pass the strategy and topology options to hab service commands (load by default)
  11. hab_service 'core/redis' do
  12.   strategy 'rolling'
  13.   topology 'standalone'
  14. end
  16. # Using update_condition
  17. hab_service 'core/redis' do
  18.   strategy 'rolling'
  19.   update_condition 'track-channel'
  20.   topology 'standalone'
  21. end

If the service has it’s own user specified that is not the hab user, don’t create the hab user on install, and instead create the application user with Chef’s user resource

  1. hab_install 'install habitat' do
  2.   create_user false
  3. end
  5. user 'acme-apps' do
  6.   system true
  7. end
  9. hab_service 'acme/apps'

hab_sup

Runs a Habitat Supervisor for one or more Habitat Services. It is used in conjunction with hab_service which will manage the services loaded and started within the supervisor.

The run action handles installing Habitat using the hab_install resource, ensures that the appropriate versions of the core/hab-sup and core/hab-launcher packages are installed using hab_package, and then drops off the appropriate init system definitions and manages the service.

All event_stream_* properties are optional, and allow the Habitat Supervisor to display details about it’s status and running services via the Chef Automate Applications Dashboard.
Note: Automate has TLS on by default. You will need to follow these instructions to make sure habitat has the proper certificates for `eventstram` Share the TLS Certificate with Chef Habitat*

Actions

  • run: starts the hab-sup service

Properties

  • toml_config: Supports using the Supervisor toml configuration instead of passing exec parameters to the service, default is false. reference
  • bldr_url: The Builder URL for the hab_package resource, if needed
  • permanent_peer: Only valid for :run action, passes --permanent-peer to the hab command
  • listen_ctl: Only valid for :run action, passes --listen-ctl with the specified address and port, e.g., 0.0.0.0:9632, to the hab command
  • listen_gossip: Only valid for :run action, passes --listen-gossip with the specified address and port, e.g., 0.0.0.0:9638, to the hab command
  • listen_http: Only valid for :run action, passes --listen-http with the specified address and port, e.g., 0.0.0.0:9631, to the hab command
  • org: Only valid for :run action, passes --org with the specified org name to the hab command
  • peer: Only valid for :run action, passes --peer with the specified initial peer to the hab command
  • ring: Only valid for :run action, passes --ring with the specified ring key name to the hab command
  • auto_update: Passes --auto-update. This will set the Habitat supervisor to automatically update itself any time a stable version has been released
  • update_condition: Passes --update-condition dictating when this service should updated. Defaults to latest. Options are latest or track-channel Note: This requires a minimum habitat version of 1.5.71
    • latest: Runs the latest package that can be found in the configured channel and local packages.
    • track-channel: Always run what is at the head of a given channel. This enables service rollback where demoting a package from a channel will cause the package to rollback to an older version of the package. A ramification of enabling this condition is packages newer than the package at the head of the channel will be automatically uninstalled during a service rollback.
  • hab_channel: The channel to install Habitat from. Defaults to stable
  • auth_token: Auth token for accessing a private organization on bldr. This value is templated into the appropriate service file.
  • gateway_auth_token: Auth token for accessing the supervisor’s HTTP gateway. This value is templated into the appropriate service file.
  • license: Specifies acceptance of habitat license when set to accept (defaults to empty string).
  • health_check_interval: The interval (seconds) on which to run health checks (defaults to 30).
  • event_stream_application: The name of your application that will be displayed in the Chef Automate Applications Dashboard
  • event_stream_environment: The application environment for the supervisor, this is for grouping in the Applications Dashboard
  • event_stream_site: Application Dashboard label for the “site” of the application - can be filtered in the dashboard
  • event_stream_url: AUTOMATE_HOSTNAME:4222 - the Chef Automate URL with port 4222 specified (can be changed if needed)
  • event_stream_token: Chef Automate token for sending application event stream data
  • event_stream_cert: With Intermediary Certificates or, Automate 2 being set to use TLS with a valid cert, you will need to provide Habitat with your certificate for communication with Automate to work. Follow these steps!
  • sup_verstion: Allows you to choose which version of supervisor you would like to install. Defaults to latest. (If a version is provided, it will also install that version of habitat if not previously installed)
  • launcher_version: Allows you to choose which version of launcher to install. Defaults to latest
  • service_version: Allows you to choose which version of the Windows Service to install. Defaults to latest
  • keep_latest: Automatically cleans up old packages. If this flag is enabled, service startup will initiate an uninstall of all previous versions of the associated package. This also applies when a service is restarted due to an update. If a number is passed to this argument, that number of latest versions will be kept. The same logic applies to the Supervisor packag env:HAB_KEEP_LATEST_PACKAGES=1 (This requires Habitat version 1.5.86+)

Examples

  1. # set up with just the defaults
  2. hab_sup 'default'
  4. # Update listen ports and use Supervisor toml config
  5. hab_sup 'test-options' do
  6.   listen_http '0.0.0.0:9999'
  7.   listen_gossip '0.0.0.0:9998'
  8.   toml_config true
  9. end
  11. # Use with an on-prem Builder
  12. # Access to public builder may not be available
  13. hab_sup 'default' do
  14.   bldr_url 'https://bldr.private.net'
  15. end
  17. # Using update_condition
  18. hab_sup 'default' do
  19.   bldr_url 'https://bldr.private.net'
  20.   hab_channel 'dev'
  21.   update_condition 'track-channel'
  22. end
  24. # Provide event_stream_* information
  25. hab_sup 'default' do
  26.   license 'accept'
  27.   event_stream_application 'myapp'
  28.   event_stream_environment 'production'
  29.   event_stream_site 'MySite'
  30.   event_stream_url 'automate.private.net:4222'
  31.   event_stream_token 'myawesomea2clitoken='
  32.   event_stream_cert '/hab/cache/ssl/mycert.crt'
  33. end
  35. # Provide specific versions
  36. hab_sup 'default' do
  37.   bldr_url 'https://bldr.private.net'
  38.   sup_version '1.5.50'
  39.   launcher_version '13458'
  40.   service_version '0.6.0' # WINDOWS ONLY
  41. end
  43. # Set latest version of packages to retain
  44. hab_sup 'default' do
  45.   bldr_url 'https://bldr.private.net'
  46.   sup_version '1.5.86'
  47.   launcher_version '13458'
  48.   service_version '0.6.0' # WINDOWS ONLY
  49.   keep_latest '2'
  50. end

hab_config

Applies a given configuration to a habitat service using hab config apply.

Actions

  • apply: (default action) apply the given configuration

Properties

  • service_group: The service group to apply the configuration to, for example, nginx.default
  • config: The configuration to apply as a ruby hash, for example, { worker_count: 2, http: { keepalive_timeout: 120 } }
  • remote_sup: Address to a remote Supervisor’s Control Gateway [default: 127.0.0.1:9632]
  • remote_sup_http: Address for remote supervisor http port. Used to pull existing configuration data. If this is invalid, config will be applied on every Chef run.
  • gateway_auth_token: Auth token for accessing the remote supervisor’s http port.
  • user: Name of user key to use for encryption. Passes --user to hab config apply

Notes

The version number of the configuration is automatically generated and will be the current timestamp in seconds since 1970-01-01 00:00:00 UTC.

Examples

  1. hab_config 'nginx.default' do
  2.   config({
  3.     worker_count: 2,
  4.     http: {
  5.       keepalive_timeout: 120
  6.     }
  7.   })
  8. end

hab_user_toml

Templates a user.toml for the specified service. This is written to /hab/user/<service_name>/config/user.toml. User.toml can be used to set configuration overriding the default.toml for a given package as an alternative to applying service group level configuration.

Actions

  • create: (default action) Create the user.toml from the specified config.
  • delete: Delete the user.toml

Properties

  • service_name: The service group to apply the configuration to, for example, nginx.default
  • config: Only valid for :create action. The configuration to apply as a ruby hash, for example, { worker_count: 2, http: { keepalive_timeout: 120 } }

Examples

  1. hab_user_toml 'nginx' do
  2.   config({
  3.     worker_count: 2,
  4.     http: {
  5.       keepalive_timeout: 120
  6.     }
  7.   })
  8. end

Maintainers

This cookbook is maintained by the following maintainers:

The goal of the Community Cookbook Engineering team is to improve cookbook quality and to aid the community in contributing to cookbooks. To learn more about our team, process, and design goals see our team documentation. To learn more about contributing to cookbooks like this see our contributing documentation, or if you have general questions about this cookbook come chat with us in #cookbok-engineering on the Chef Community Slack

License

Copyright: 2016-2018, Chef Software, Inc.

  1. Licensed under the Apache License, Version 2.0 (the "License");
  2. you may not use this file except in compliance with the License.
  3. You may obtain a copy of the License at
  5.     http://www.apache.org/licenses/LICENSE-2.0
  7. Unless required by applicable law or agreed to in writing, software
  8. distributed under the License is distributed on an "AS IS" BASIS,
  9. WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  10. See the License for the specific language governing permissions and
  11. limitations under the License.