Python-OSSDE

Electric Power System Stability and Operation

In the project given by my lecture, I have done calculate using Matlab before. I want to try Python to perform the calculation. Electrical Network Data are given below.

To do

1. Bus 1 as slack bus with V1 = 220 kV. Calculate bus voltage and power that unknown. Then calculate real power loss. Write the result on the table 2.
2. Create Matrix-B then use it to calculate:

Solution

1. The code on code.py

First, I need to find Voltage with Gauss Seidel Method

Vbus: [[220. +0.j] [222.59221802 -1.47934401j] [220.99923823 -2.58790192j] [217.31141086-10.41324995j] [216.4663692 -9.66877979j] [220.75227036 -3.11118912j] [219.42440185 -3.642961j]]

Find Magintude

V (Magnitude, kV)[[220. ] [222.59221802] [220.99923823] [217.31141086] [216.4663692 ] [220.75227036] [219.42440185]]

Find Angle

V (Angle, rad) [[ 0. ] [-0.00664588] [-0.01170947] [-0.04788193] [-0.04463676] [-0.01409264] [-0.01660083]]

Calculate Sbus using new Vbus

Sbus : [[ 85.9488007-68.1467101j] [ 100. +40.j ] [ 75. +25.j ] [-100. -30.j ] [ -64. -44.j ] [ -45. -15.j ] [ -50. -15.j ]]

Calculate Sloss

Sloss : [[1.9488007-107.1467101j]]

Find Ploss

Ploss : [[1.9488007]]

The Table

Bus	V (mag, kV)	V (Angle, rad)	Pgen (MW)	Qgen (MVar)	PLoad (MW)	QLoad (MVar)
1	220	0	85.9488007	-68.1467101	0	0
2	222.59221802	-0.00664588	100	40	0	0
3	220.99923823	-0.01170947	75	25	0	0
4	217.31141086	-0.04788193	0	0	100	30
5	216.4663692	-0.04463676	0	0	64	44
6	220.75227036	-0.01409264	0	0	45	15
7	219.42440185	-0.01660083	0	0	50	15

---

Ploss = 1.9488007 MW

1. Calculate total load current.

Working on it..