ssd1351-spin

This is a P8X32A/Propeller, P2X8C4M64P/Propeller 2 driver object for Solomon Systech SSD1351-based OLED displays

IMPORTANT: This software is meant to be used with the spin-standard-library (P8X32A) or p2-spin-standard-library (P2X8C4M64P). Please install the applicable library first before attempting to use this code, otherwise you will be missing several files required to build the project.

Salient Features

• SPI connection at fixed 20MHz (P1), up to 20MHz (P2); 4-wire: DIN, CLK, CS, DC (and optionally RESET)
• Integration with the generic bitmap graphics library, as well as some support for unbuffered, direct-to-display operations
• Display mirroring, rotation
• Control display visibility (independent of display RAM contents)
• Set subpixel order
• Set color depth (16, 18-bit can be set; currently only 16-bit supported by driver)
• Set contrast/brightness (individual color channel as well as a master scaling factor)
• Low-level display configuration settings: Precharge periods and levels, Oscillator freq and divider, logic levels

Requirements

P1/SPIN1:

• spin-standard-library
• P1/SPIN1: 1 extra core/cog for the PASM SPI engine
• graphics.common.spinh (provided by spin-standard-library)

P2/SPIN2:

• p2-spin-standard-library
• graphics.common.spin2h (provided by p2-spin-standard-library)

Compiler Compatibility

(other versions or toolchains not listed are not supported, and may or may not work)

Hardware Compatibility

• Tested with Adafruit P/N #1431, Newhaven P/N NHD-1.5-128128ASC3, MikroE P/N 5545

Limitations

• Maximum display resolution is limited when using buffered mode with the P1 driver, due to memory usage (doesn’t apply when built #defining GFX_DIRECT)